Moore 30
| Development | |
|---|---|
| Designer | Gary Mull |
| Location | United States |
| Year | 1985 |
| No. Built | 5 |
| Boat | |
| Boat Weight | 2,000 lb (910 kg) |
| Draft | 6.5 ft (2.0 m) |
| Hull | |
| Construction | Fiberglass |
| LOA | 30.00 ft (9.14 m) |
| LWL | 26.25 ft (8.00 m) |
| Beam | 14 ft (4.3 m), including hiking wings |
| Hull Appendages | |
| Keel/Board Type | fin keel |
| Rig | |
| Rig Type | Fractional rigged sloop Masthead sloop |
| I (Foretriangle Height) | 36.50 ft (11.13 m) |
| J (Foretriangle Base) | 11.00 ft (3.35 m) |
| P (Mainsail Luff) | 38.50 ft (11.73 m) |
| E (Mainsail Foot) | 13.75 ft (4.19 m) |
| Sails | |
| Mainsail area | 264.69 sq ft (24.591 m2) |
| Jib / Genoa area | 200.75 sq ft (18.650 m2) |
| Total sail area | 465.44 sq ft (43.241 m2) |
The Moore 30 is an American sailboat, that was designed by Gary Mull as a racer and first built in 1985. The design is out of production.[1][2][3]
The boat was built by Moore Sailboats in Watsonville, California, United States and only five were built.[1]
Design
The Moore 30 is a small recreational keelboat, built predominantly of fiberglass. It has a fractional sloop rig and a fixed fin keel. It displaces 2,000 lb (907 kg) and carries 800 lb (363 kg) of ballast. The beam is 14 ft (4.3 m), including the boat's hiking wings.[1][2]
The boat has a hull speed of 6.87 kn (12.72 km/h).[2]
See also
References
- 1 2 3 Browning, Randy (2016). "Moore 30 sailboat specifications and details". sailboatdata.com. Retrieved 1 September 2016.
- 1 2 3 InterVisionSoft LLC (2016). "Sailboat Specifications for Moore 30". Sailing Joy. Retrieved 1 September 2016.
- ↑ Browning, Randy (2016). "Garry Mull (1939–1994)". sailboatdata.com. Retrieved 1 September 2016.
This article is issued from Wikipedia - version of the 9/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.